Condo inspection includes:
Inspecting and testing the appliances
Typically,the inspector is checking and testing the appliances for the client as a courtesy. Per standards of practice,the inspectors are not required to inspect kitchen appliances.
Inspecting the floors, ceilings, windows and walls
The windows should be easy operable, free of cracks or moisture between the panes. All open-able windows should have screens. Structural cracks on the walls may indicate a problem with the foundation. Sloped floors warped or damaged may need to be replaced and there could be underlying problems as water damage. The windows,doors should be inspected for moisture intrusion or lack of proper sealing.
Inspecting the Electrical System
A home inspector should inspect and test the electrical system in your unit. A condo inspection should include testing the outlets, lights and switches. The service panel or main electrical panel is the most important component in the electrical system. Improper electrical system can pose fire hazard and your lender may not approve the loan. An inspector may also check for electrical system updates, check and test the ground fault interrupter (GFCI) outlets in the balconies,roof taps, patios, bathrooms and kitchen.
Inspecting the HVAC systems
The inspector should inspect and test the furnace and air conditioning units (if whether permitted) in all condominium inspections if they are present. Improper clearances, moisture, disconnected duct, flues and leaking plumbing connections are reported in the report. In most cases the inspector recommends servicing of the heating units prior the closing.
Inspecting the plumbing system
The water pressure, drainage and all plumbing fixtures will be tested. We check for water leakage and improper connections.The water heater would be inspected. Washers,dryers are tested and inspected for leakage.
